4. Move the ShuttlePoint knob to highlight the desired Lake. Otherwise press [MENU] to
enter the desired Lake name. A window will be shown: move the ShuttlePoint knob to
highlight the edit of Lake name and press [ENT] to accept: another popup window will
appear displaying the distance and position of the Lake.
5. Press [ENT] to show the actual position of the Lake on the Chart page.
6. Press [CLR] again at any time to return your cursor to your vessel's position.
4.0.7
Points Of Interest
This feature is used to locate Points Of Interest nearest the position of your vessel.
1. Press [INFO].
2. Move the ShuttlePoint knob to highlight POINTS OF INTEREST and press [ENT] or
move the ShuttlePoint knob to the right.
3. A (Category) popup window will be shown with a list of Category types (i.e. attractions,
emergency, entertainment).
4. Move the ShuttlePoint knob to highlight the desired Category and press [ENT].
5. A (Type) popup window will be shown with a list of types.
6. Move the ShuttlePoint knob to highlight the desired Type and press [ENT].
7. A popup window will be shown with a list of nearest Points Of Interest that fall into the
Category and Type you have selected.
8. Move the ShuttlePoint knob up/down to highlight the desired Point Of Interest and press [ENT].
9. Another window will be shown with detailing the Point Of Interest information.
10. Press [CLR] to show the actual position of the Point Of Interest on the Chart page.
11. Press [CLR] again at any time to return your cursor to your vessel's position.
CP500
Figure 4.0.6 - Find Lakes By Name
Figure 4.0.7 - Find Points Of Interest
Page 39