Dcbx Configuration Example - HP 6125XLG Configuration Manual

Number of sent optional TLV
Number of received unknown TLV : 0
LLDP agent nearest-nontpmr:
Port status of LLDP
Admin status
Trap flag
MED trap flag
Polling interval
Number of LLDP neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 0
LLDP agent nearest-customer:
Port status of LLDP
Admin status
Trap flag
MED trap flag
Polling interval
Number of LLDP neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 0

DCBX configuration example

Network requirements
As shown in
switch (Switch A) connects to the FCoE adapter of the data center server (DC server).
Configure Switch A to implement lossless FCoE and FIP frame transmission to DC server.
NOTE:
Suppose that both Switch A and DC server support DCBX Rev 1.01.
Figure 74 Network diagram
Figure 74, in a data center network, interface Ten-GigabitEthernet 1/0/1 of the access
: 0
: Enable
: Disable
: No
: No
: 0s
: 0
: 0
: 0
: 1
: Enable
: Disable
: No
: No
: 0s
: 0
: 0
: 0
: 16
260