HP 6125XLG Configuration Manual page 193

[DeviceC-mst-region] region-name example
[DeviceC-mst-region] instance 1 vlan 10
[DeviceC-mst-region] instance 2 vlan 20
[DeviceC-mst-region] revision-level 0
# Manually activate the MST region configuration.
[DeviceC-mst-region] active region-configuration
[DeviceC-mst-region] quit
# Configure Device C as the root bridge of MSTI 0.
[DeviceC] stp instance 0 root primary
# Globally enable the spanning tree feature.
[DeviceC] stp global enable
# Globally enable MVRP.
[DeviceC] mvrp global enable
# Configure port Ten-GigabitEthernet 1/1/5 as a trunk port, and configure it to permit all VLANs.
[DeviceC] interface ten-gigabitethernet 1/1/5
[DeviceC-Ten-GigabitEthernet1/1/5] port link-type trunk
[DeviceC-Ten-GigabitEthernet1/1/5] port trunk permit vlan all
# Enable MVRP on port Ten-GigabitEthernet 1/1/5.
[DeviceC-Ten-GigabitEthernet1/1/5] mvrp enable
[DeviceC-Ten-GigabitEthernet1/1/5] quit
# Configure port Ten-GigabitEthernet 1/1/6 as a trunk port, and configure it to permit all VLANs.
[DeviceC] interface ten-gigabitethernet 1/1/6
[DeviceC-Ten-GigabitEthernet1/1/6] port link-type trunk
[DeviceC-Ten-GigabitEthernet1/1/6] port trunk permit vlan all
# Enable MVRP on port Ten-GigabitEthernet 1/1/6.
[DeviceC-Ten-GigabitEthernet1/1/6] mvrp enable
[DeviceC-Ten-GigabitEthernet1/1/6] quit
Configuring Device D
# Enter MST region view.
<DeviceD> system-view
[DeviceD] stp region-configuration
# Configure the MST region name, VLAN-to-instance mappings, and revision level.
[DeviceD-mst-region] region-name example
[DeviceD-mst-region] instance 1 vlan 10
[DeviceD-mst-region] instance 2 vlan 20
[DeviceD-mst-region] revision-level 0
# Manually activate the MST region configuration.
[DeviceD-mst-region] active region-configuration
[DeviceD-mst-region] quit
# Globally enable the spanning tree feature.
[DeviceD] stp global enable
# Globally enable MVRP.
[DeviceD] mvrp global enable
183