The output shows that the device has removed the loops from Ten-GigabitEthernet 1/1/5 and
Ten-GigabitEthernet 1/1/6 according to the shutdown action.
Use the display interface command to display the status of Ten-GigabitEthernet 1/1/5 and
Ten-GigabitEthernet 1/1/6 on Device A.
# Display the status of Ten-GigabitEthernet 1/1/5 on Device A.
[DeviceA] display interface ten-gigabitethernet 1/1/5
Ten-GigabitEthernet1/1/5 current state: DOWN (Loop detection down)
...
# Display the status of Ten-GigabitEthernet 1/1/6 on Device A.
[DeviceA] display interface ten-gigabitethernet 1/1/6
Ten-GigabitEthernet1/1/6 current state: DOWN (Loop detection down)
...
The output shows that Ten-GigabitEthernet 1/1/5 and Ten-GigabitEthernet 1/1/6 are already shut
down by the loop detection module.
132