Verifying The Configuration - HP 6125XLG Configuration Manual

# Configure port Ten-GigabitEthernet 1/1/5 as a trunk port, and configure it to permit VLANs 20 and
40.
[DeviceD] interface ten-gigabitethernet 1/1/5
[DeviceD-Ten-GigabitEthernet1/1/5] port link-type trunk
[DeviceD-Ten-GigabitEthernet1/1/5] port trunk permit vlan 20 40
# Enable MVRP on port Ten-GigabitEthernet 1/1/5.
[DeviceD-Ten-GigabitEthernet1/1/5] mvrp enable
[DeviceD-Ten-GigabitEthernet1/1/5] quit
# Configure port Ten-GigabitEthernet 1/1/6 as a trunk port, and configure it to permit VLAN 40.
[DeviceD] interface ten-gigabitethernet 1/1/6
[DeviceD-Ten-GigabitEthernet1/1/6] port link-type trunk
[DeviceD-Ten-GigabitEthernet1/1/6] port trunk permit vlan 40
# Enable MVRP on port Ten-GigabitEthernet 1/1/6.
[DeviceD-Ten-GigabitEthernet1/1/6] mvrp enable
[DeviceD-Ten-GigabitEthernet1/1/6] quit

Verifying the configuration

1. Verify the normal registration mode configuration:
Use the display mvrp running-status command to display the local MVRP VLAN information to
verify whether the configuration takes effect.
# Display the local VLAN information on Device A.
[DeviceA] display mvrp running-status
-------[MVRP Global Info]-------
Global Status
Compliance-GVRP
----[Ten-GigabitEthernet1/1/5]----
Config
Running Status
Join Timer
Leave Timer
Periodic Timer
LeaveAll Timer
Registration Type
Registered VLANs :
1(default)
Declared VLANs :
1(default), 10, 20
Propagated VLANs :
1(default)
----[Ten-GigabitEthernet1/1/6]----
Config
Running Status
Join Timer
Leave Timer
: Enabled
: False
Status
Status
: Enabled
: Enabled
: 20 (centiseconds)
: 60 (centiseconds)
: 100 (centiseconds)
: 1000 (centiseconds)
: Normal
: Enabled
: Enabled
: 20 (centiseconds)
: 60 (centiseconds)
184