Configuring The Cvlan Tpid; Configuring The Svlan Tpid; Setting The 802.1P Priority In Svlan Tags - HP 6125XLG Configuration Manual

Protocol type
IPv6
PPPoE
MPLS
IPX/SPX
IS-IS
LACP
802.1X
LLDP
802.1ag
Cluster
Reserved

Configuring the CVLAN TPID

Step
1. Enter system view.
2. Configure the TPID value for
CVLAN tags.

Configuring the SVLAN TPID

Configure the SVLAN TPID on service provider-side ports of PEs.
On a QinQ-enabled port, you cannot configure the SVLAN TPID.
EVB and SVLAN TPID configuration are mutually exclusive. Do not configure both features on a port.
To configure the SVLAN TPID on a service provider-side port:
Step
1. Enter system view.
2. Enter Ethernet interface view
or aggregate interface view.
3. Configure the SVLAN TPID.

Setting the 802.1p priority in SVLAN tags

By default, a QinQ-enabled port sets the 802.1p priority in the SVLAN tag depending on the priority trust
mode.
Value
0x86DD
0x8863/0x8864
0x8847/0x8848
0x8137
0x8000
0x8809
0x888E
0x88CC
0x8902
0x88A7
0xFFFD/0xFFFE/0xFFFF
Command
system-view
qinq ethernet-type customer-tag
hex-value
Command
system-view
interface interface-type
interface-number
qinq ethernet-type service-tag
hex-value
194
Remarks
N/A
The default setting is 0x8100 for
CVLAN tags.
Remarks
N/A
N/A
The default setting is 0x8100 for
SVLAN tags.