HP 6125XLG Configuration Manual page 272

# Enable byte-count WRR queuing on interface Ten-GigabitEthernet 1/0/1, and configure queue
3 on the interface to use strict priority queuing.
[SwitchA-Ten-GigabitEthernet1/0/1] qos wrr byte-count
[SwitchA-Ten-GigabitEthernet1/0/1] qos wrr 3 group sp
4. Enable interface Ten-GigabitEthernet 1/0/1 to automatically negotiate with its peer to decide
whether to enable PFC, and enable PFC for 802.1 priority 3.
[SwitchA-Ten-GigabitEthernet1/0/1] priority-flow-control auto
[SwitchA-Ten-GigabitEthernet1/0/1] priority-flow-control no-drop dot1p 3
Verifying the configuration
# Display the data exchange result on the DC server through the software interface to verify the
configuration. This example uses the data exchange result for a Qlogic adapter on the DC server.
------------------------------------------------------
DCBX Parameters Details for CNA Instance 0 - QLE8142
------------------------------------------------------
Mon May 17 10:00:50 2010
DCBX TLV (Type-Length-Value) Data
=================================
DCBX Parameter Type and Length
DCBX Parameter Length: 13
DCBX Parameter Type: 2
DCBX Parameter Information
Parameter Type: Current
Pad Byte Present: Yes
DCBX Parameter Valid: Yes
Reserved: 0
DCBX Parameter Data
Priority Group ID of Priority 1: 0
Priority Group ID of Priority 0: 2
Priority Group ID of Priority 3: 15
Priority Group ID of Priority 2: 1
Priority Group ID of Priority 5: 5
Priority Group ID of Priority 4: 4
Priority Group ID of Priority 7: 7
Priority Group ID of Priority 6: 6
Priority Group 0 Percentage: 2
Priority Group 1 Percentage: 4
Priority Group 2 Percentage: 6
Priority Group 3 Percentage: 0
Priority Group 4 Percentage: 10
262