Dcbx Configuration Example - HP 5820X series Configuration Manual

Port ID
Sofrware version
Platform
Duplex
CDP neighbor-information of port 2[GigabitEthernet1/0/2]:
CDP neighbor index : 2
Chassis ID
Port ID
Sofrware version
Platform
Duplex
As the sample output shows, Switch A has discovered the IP phones connected to GigabitEthernet 1/0/1
and GigabitEthernet 1/0/2, and has obtained their LLDP device information.

DCBX configuration example

Network requirements
As shown in Figure
Interface Ten-GigabitEthernet 1/0/1 of the access switch (Switch A) connects to the FCoE adapter of
•
the data center server (DC server).
Configure Switch A to prioritize and implement lossless transmission for FCoE and FIP packets to DC
•
server.
NOTE:
Suppose that both Switch A and DC server support DCBX Rev 1.01.
Figure 72 Network diagram for DCBX configuration
Configuration procedure
Enable LLDP and DCBX TLV advertising
1.
# Enable LLDP globally.
<SwitchA> system-view
[SwitchA] lldp enable
# Enable LLDP and DCBX TLV advertising on interface Ten-GigabitEthernet 1/0/1.
[SwitchA] interface ten-gigabitethernet 1/0/1
[SwitchA-Ten-GigabitEthernet1/0/1] lldp enable
[SwitchA-Ten-GigabitEthernet1/0/1] lldp tlv-enable dot1-tlv dcbx
[SwitchA-Ten-GigabitEthernet1/0/1] quit
: Port 1
: P0030301MFG2
: Cisco IP Phone 7960
: Full
: SEP00141CBCDBFF
: Port 1
: P0030301MFG2
: Cisco IP Phone 7960
: Full
72, in a data center network:
222