Configuration Considerations - HP 6125XLG Configuration Manual

Figure 41 Network diagram
VLAN 100
192.168.5.0/24

Configuration considerations

To meet the network requirements, you must perform the following tasks:
1. Create VLANs 100 and 200.
2. Associate IP subnets 192.168.5.0/24 and 192.168.50.0/24 with the VLANs 100 and 200,
respectively.
3. Associate Ten-GigabitEthernet 1/1/5 with IP subnet-based VLANs 100 and 200.
Configuration procedure
1. Configuring Device C:
# Associate IP subnet 192.168.5.0/24 with VLAN 100.
<DeviceC> system-view
[DeviceC] vlan 100
[DeviceC-vlan100] ip-subnet-vlan ip 192.168.5.0 255.255.255.0
[DeviceC-vlan100] quit
# Associate IP subnet 192.168.50.0/24 with VLAN 200.
[DeviceC] vlan 200
[DeviceC-vlan200] ip-subnet-vlan ip 192.168.50.0 255.255.255.0
[DeviceC-vlan200] quit
# Configure Ten-GigabitEthernet 1/1/11 as a hybrid port to forward packets from VLAN 100
tagged.
[DeviceC] interface ten-gigabitethernet 1/1/11
[DeviceC-Ten-GigabitEthernet1/1/11] port link-type hybrid
[DeviceC-Ten-GigabitEthernet1/1/11] port hybrid vlan 100 tagged
[DeviceC-Ten-GigabitEthernet1/1/11] quit
Device A
XGE1/1/11
XGE1/1/12
Device C
XGE1/1/5
Office
Device B
VLAN 200
192.168.50.0/24
146