Table of Contents
Advertisement
System (SCADA)
Interface (optional)
7SA6 Manual
C53000-G1176-C156
– Test voltage
– Transmission speed
– Maximum transmission distance
Optical fibre
– Connector Type
for flush mounted case
for surface mounted case
– Optical wavelength
– Laser class 1 acc. EN 60825–1/ –2
– Permissible optical signal attenuation max. 8 dB using glass fibre 62.5/125 µm
– Maximum transmission distance
– Character idle state
RS232/RS485/Optical
Profibus RS485/Profibus Optical
acc. to ordered version
RS232
– Connection for flush mounted case
for surface mounted case
– Test voltage
– Transmission speed
– Maximum transmission distance
RS485
– Connection for flush mounted case
for surface mounted case
– Test voltage
– Transmission speed
– Maximum transmission distance
– Bridging distance
Profibus RS485
– Connection for flush mounted case
for surface mounted case
shielded data cable
500 V; 50 Hz
min. 4800 Baud; max. 115200 Baud
factory setting: 38400 Baud
max. 1km
ST–connector
rear panel, mounting location "C"
at the inclined housing on the case bottom
λ = 820 nm
using glass fibre 50/125 µm or
using glass fibre 62.5/125 µm
1.5 km (0.93 miles)
selectable; factory setting: "Light off"
floating interface for data transfer
to a master terminal
rear panel, mounting location "B"
9-pin DSUB socket
at the inclined housing on the case bottom
9-pin DSUB socket
500 V; 50 Hz
min. 4800 Bd, max. 38400 Bd
factory setting: 19200 Bd
15 m (50 ft)
rear panel, mounting location "B"
9-pin DSUB socket
at the inclined housing on the case bottom
9-pin DSUB socket
500 V, 50 Hz
min. 4800 Bd, max. 38400 Bd
factory setting: 19200 Bd
1000 m (3280 ft)
max. 1 km
rear panel, mounting location "B"
9-pin DSUB socket
at the inclined housing on the case bottom
9-pin DSUB socket
Technical Data
10-7
Advertisement
Table of Contents
