Table of Contents
Advertisement
Configuration
Information Groups
Information
5-18
All information is organized into information groups. In addition to general relay infor-
mation, information regarding individual device functions is also included.
By clicking on an information group title area with the right mouse button, a context
menu can be viewed, which contains information regarding the properties of that infor-
mation group. This is particularly useful if the information group is associated with a
function that contains parameter settings.
If the information group belongs to a protective function for the relay, a dialogue win-
dow can be accessed in which the settings of the protective function may be read out
and modified. The procedure for entering settings of a protective function is described
in general in Chapter 4. Details regarding the settings for various functions are found
in Chapter 6.
The settings group to be processed may be selected via the menu item View → Set-
ting Group.
The column header Information contains the function number, the LCD text (dis-
play text), an explanation (long text), and the information type. The following abbrevi-
ations are used for the information types:
• Annunciations:
− SP
Single Point Indication (binary input, e.g. LED reset, refer also to
subsection 5.2.1)
− DP
Double Point Indication (binary input, refer also to subsection 5.2.1)
− OUT
Output Indication (protection output signals e.g. pickup, trip ...)
− IntSP
Internal Single Point Indication,
− IntDP
Internal Double Point Indication.
− TxTap
Transformer Tap Indication
• Control Commands for switching devices (refer to subsection 5.2.3):
− C_S
Single Command with Single Output without Feedback,
− CF_S
Single Command with Single Output with Feedback,
− C_SN
Single Command with Single Output Negated without Feedback,
− C_D2
Double Command (2 relays) with Single Outputs without Feedback,
− CF_D2
Double Command (2 relays) with Single Outputs with Feedback,
− C_D12
Double Command with Single Trip Outputs and Double Close Outputs
without Feedback,
− CF_D12 Double Command with Single Trip Outputs and Double Close Outputs
with Feedback,
− C_D3
Double Command (3 relays) with Single Outputs and Common Output
without Feedback,
− CF_D3
Double Command (3 relays) with Single Outputs and Common Output
with Feedback,
− C_D4
Double Command (4 relays) with Double Outputs without Feedback,
− CF_D4
Double Command (4 relays) with Double Outputs with Feedback,
− C_D2N
Double Command (2 relays) with Single Outputs Negated
without Feedback,
− CF_D2N Double Command (2 relays) with Single Outputs Negated with
Feedback.
• Measured Values:
− MV
Measured Value,
− MVU
Measured Value, User Defined,
7SA6 Manual
C53000-G1176-C156-2
Advertisement
Table of Contents
