Table of Contents
Advertisement
CFC
Viewing the Config-
uration on the
Operating Panel
7SA6 Manual
C53000-G1176-C156-2
®
SIPROTEC
4 device information can be connected in a user-specified manner using
the programmable logic components of the DIGSI
implement interlocking checks, create grouped messages, or derive limit value viola-
tion messages.
Information can be both a source and a destination in combined CFC editing. The spe-
cific logic's inputs, e.g. the individual messages that are to be combined to form a
grouped message, must be marked in the Destination C column. The logic's output,
the grouped message in this example, is derived from the Source C column.
The configuration can be seen on the operating panel of the SIPROTEC
• In the main menu, select Settings → Masking (I/O).
MASKING (I/O)
---------------------
>Binary Inputs
>LED
• In the next menu, select Masking (I/O) → e.g. Binary Inputs.
BINARY INPUTS
---------------------
>Binary Input 1 –>
>Binary Input 2 –>
Figure 4-18
Reading the configuration using the operator control panel, example assignment
of binary input 2
®
01/03
–>
1
–>
2
02/20
–
–
®
SIPROTEC
4 CFC. For example, the user can
®
4 Devices
4 device.
.
.
4-23
Advertisement
Table of Contents
