Siemens SIPROTEC 7SA6 Manual page 3

Distance protection relay for all voltage levels

Hide thumbs Also See for SIPROTEC 7SA6:

Table of Contents

Aim of This Manual

Target Audience

Applicability of this

Additional support

C53000-G1176-C156-2

This manual describes the functions, operation, installation, and commissioning of the

device. In particularly, you will find:

• General information regarding operation of SIPROTEC

• Information regarding configuration of the device → Chapter 5,

• Description of the device functions and setting facilities → Chapter 6,

• Instruction of operation while in service → Chapter 7,

• Instruction for mounting and commissioning → Chapter 8,

• List of the technical data → Chapter 10.

As well as a compilation of the most significant data for experienced users in the Ap-

Protection engineers, commissioning engineers, persons who are involved in setting,

testing and service of protection, automation, and control devices, as well as operation

personnel in electrical plants and power stations.

This manual is valid for SIPROTEC

Indication of Conformity

This product complies with the directive of the Council of the European Communities

on the approximation of the laws of the member states relating to electromagnetic

compatibility (EMC Council Directive 89/336/EEC) and concerning electrical equip-

ment for use within specified voltage limits (Low-voltage Directive 73/23/EEC).

This conformity has been proved by tests conducted by Siemens AG in accordance

with Article 10 of the Council Directive in agreement with the generic standards

EN 50081 and EN 50082 (for EMC directive) and the standards EN 60255-6 (for low-

voltage directive).

The conforms with the international standards of IEC 60255 and the German stand-

ards DIN 57435 part 303 (corresponding to VDE 0435 part 303).

Should further information be desired or should particular problems arise which are

not covered sufficiently for the purchaser's purpose, the matter should be referred to

the local Siemens representative.

Individual course offerings may be found in our Training Catalog, or questions can be

directed to our training center. Please contact your Siemens representative.

7SA6 Distance Protection; firmware version 4.2.

4 devices → Chapter 4,