Jumper Settings On Printed Circuit Boards - Siemens SIPROTEC 7SA6 Manual

8.1.3.3

Jumper Settings on Printed Circuit Boards

Processor Board
C-CPU-2
Figure 8-12 Processor printed circuit board C-CPU-2
7SA6 Manual
C53000-G1176-C156-2
The layout of the printed circuit board of the processor printed circuit board C-CPU-2
is illustrated in Figure 8-12.
The set nominal voltage of the integrated current supply is checked according to Table
8-2, the quiescent state of the life contact according to Table 8-3 and the selected op-
erating voltage of the binary inputs BI1 to BI5 according to Table 8-4 and the integrat-
ed interface RS232 / RS485 according to Table 8-5 to 8-7.
+ –
G1
with jumper settings required for the module configuration
Installation and Commissioning
F1
X111
X110
X108
8-21