Unpair A Bluetooth Device - Grandstream Networks WP820 User Manual

5. Enter a name and tap on Save
Pair WP820 with a Bluetooth Device
Before connecting the WP820 with other Bluetooth device, users must pair them first. They will stay paired afterwards unless
they are unpaired.
1. Go to WP820's Settings��Network Settings��Bluetooth.
2. Turn on Bluetooth.
3. Go to WP820's Settings��Network Settings��Bluetooth Settings and set "Visible to nearby Bluetooth devices" to ON
and set the Visibility timeout settings to make the WP820 phone visible to all nearby Bluetooth devices.
4. Set the Bluetooth headset mode parameter to ON in order to allow the WP820 to pair with other Bluetooth mobile
devices to make calls. After successful pairing, users can press the call key and then press "Accounts" to select the
Bluetooth account.
5. Access the Bluetooth devices settings and press on Refresh softkey, the WP820 will scan and display the IDs of all
available Bluetooth devices in range. If the device you would like to pair with does not show up in the list (available devices),
ensure that the other device is turned on and set to be discoverable.
Once the Bluetooth device shows up in the result, press on it and specify if you want to allow it to access your contacts and
call history then press on Pair. Confirm the passkey in the prompted message (if any).

Unpair a Bluetooth Device

1. In the Bluetooth devices settings �� Paired devices, select, and press on the already paired Bluetooth device name you
want to unpair
Figure 17: Make calls using
Bluetooth account
Figure 18: Pair WP820 to a
Bluetooth Device