Tag-Based Group - Lancom ES-2126+ Manual

LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 4: Operation of Web- based Management
4.9.2

Tag-based Group

Add Group: Input the VLAN name, VID and then choose the member by ticking
the check box beside the port No. to create a new Tag-based VLAN. As to the
parameter of Untag, it stands for an egress rule of the port. If you tick the
check box beside the port No., packets with this VID outgoing from this port
64
Function name: Tag-based Group Configuration
Function Description: It shows the information of existed Tag-based VLAN
Groups. You can also easily create, edit and delete a Tag-based VLAN
group by pressing <Add>, <Edit> and <Delete> function buttons. User
can add a new VLAN group by inputting a new VLAN name and VLAN ID
after pressing <Add> button.
Parameter Description:
VLAN Name: The name defined by administrator is associated with a
VLAN group. Valid letters are A-Z, a-z, 0-9, "
The maximal length is 15 characters.
VID: VLAN identifier. Each tag-based VLAN group has a unique VID.
It appears only in tag-based and Double-tag mode.
Member: This is used to enable or disable if a port is a member of the
new added VLAN, "Enable" means it is a member of the VLAN. Just
tick the check box beside the port x to enable it.
-
" and "_" characters.