Encom iPULSE R User Manual page 76

Could not update radio settings,
please try again
Demo mode
Getting radio settings, please wait
Incompatible radio found
iPULSE radio on-line (192.168.0.1)
Multiple radios found, please unplug
all but one
Radio detected, attempting to
communicate
For ENCOM PULSE Link Version 2.2.6
the radio, wait a minute, and plug them back in. The radio
should be detected, and its configuration automatically
loaded.
For iPULSE radios, unplug the Ethernet and power cables
from the radio, wait a minute, plug them back in, click the
Search for iPULSE devices
iPulse Radios form, and click the Load button to load the
radio's configuration.
Contact your ENCOM customer service representative if the
problem persists.
An error occurred trying to update the radio settings.
For PULSE radios, unplug the USB and power cables from
the radio, wait a minute, plug them back in, wait for the
radio's configuration to be loaded, and then try again.
For iPULSE radios, unplug the Ethernet and power cables
from the radio, wait a minute, plug them back in, click the
Search for iPULSE devices
iPulse Radios form, click the Load button to load the radio's
configuration, and then try again.
Contact your ENCOM customer service representative if the
problem persists.
The application is currently running in demo mode.
Displayed while the application is getting the settings from
the radio. Do not disconnect the radio while the application
is in this state.
ENCOM PULSE Link was able to communicate with the
radio, but determined that it is not able to support it.
You may need to upgrade to the latest version of ENCOM
PULSE Link, or use a different application that was designed
to support the radio.
The application is connected to an iPULSE radio that has
the specified IP address.
ENCOM PULSE Link can only manage one USB-based
PULSE radio at a time. Unplug all other PULSE radios in
order to proceed.
ENCOM PULSE Link has detected a radio on the USB port,
and is currently trying to communicate with it.
Page 76
ENCOM PULSE Link
USER MANUAL
button, select the radio in the
button, select the radio in the
© 2012-2015 Encom Wireless Data Solutions Inc.