Signal Strength Toolbar - Encom iPULSE R User Manual

Signal Strength Toolbar

The Signal Strength toolbar allows you to manage a signal strength monitoring session.
The following table describes the items found in the Signal Strength toolbar:
Item Name
Start
Stop
Start radio address
End radio address
For ENCOM PULSE Link Version 2.2.6
Description
Click the Start button to start a signal strength monitoring session.
Click the Stop button to stop an active signal strength monitoring session.
Specify the Unit Address of the first radio to monitor.
The Unit Address is configured in the
Specify the Unit Address of the second radio to monitor. In order for the
results to be meaningful, the end radio should be in direct communication
with the start radio (i.e. there is no repeater between the two radios).
Page 122
ENCOM PULSE Link
USER MANUAL
Wireless tab of the Settings
© 2012-2015 Encom Wireless Data Solutions Inc.
panel.