Poll Test Report - Encom iPULSE R User Manual

Poll Test Report

The poll test report area displays the results of the poll test. The following screen shot shows a
typical poll test report:
The following table describes the columns of the poll test report.
Column Name
State
For ENCOM PULSE Link Version 2.2.6
Description
The state column shows the current state of the poll test for the
associated radio. The following table describes the colors used:
Color State
The radio has not yet been polled.
The master radio's state is always gray, since it is not
polled (as it is actually doing the polling).
The radio has responded at least 90% of the poll
messages sent to it.
The radio has responded to at least 70%, but less than
90%, of the poll messages sent to it. The issues that are
causing the poll failures should be addressed.
Page 128
ENCOM PULSE Link
USER MANUAL
© 2012-2015 Encom Wireless Data Solutions Inc.