Setting The 5000 Series Radio Product Code - Encom iPULSE R User Manual

Setting the 5000 Series Radio Product Code

When you connect to a 5000 series radio in which a 5000 series adapter card has been installed,
you will be prompted to assign a product type to the adapter card. To following steps describe the
process of assigned the product type:
1. Run the ENCOM PULSE Link application on your computer.
2. Connect to the 5000 series radio
3. After the radio is discovered, you will be prompted to assign a product type:
4. Click the Yes button to proceed.
For ENCOM PULSE Link Version 2.2.6
using a serial or serial-to-USB cable.
Page 24
ENCOM PULSE Link
USER MANUAL
© 2012-2015 Encom Wireless Data Solutions Inc.