Recover - Encom iPULSE R User Manual

Recover

Select Recover from the Radio menu to restore a PULSE of 5000 series radio after a failed
firmware upgrade. Depending on the problem with the firmware, PULSE Link may not be able to
communicate with the radio. If this occurs, the application will cycle through all possible combination
of baud rates and serial settings in an attempt to communicate with it. Recovering the radio may fix
this issue if it occurs.
Note that it is not possible to recover an iPULSE radio if a firmware upgrade fails. If the radio no
longer works after a firmware upgrade, it will have to be sent back to ENCOM for repair.
Refer to the following topic for instructions on recovering a PULSE or 5000 series radio:
Recovering a PULSE Radio
Recovering a 5000 Series Radio
For ENCOM PULSE Link Version 2.2.6
Page 45
© 2012-2015 Encom Wireless Data Solutions Inc.
ENCOM PULSE Link
USER MANUAL