Connecting To A 5000 Series Radio - Encom iPULSE R User Manual

Connecting to a 5000 Series Radio

To connect to a 5000 series radio in which a 5000 series adapter card has been installed:
1. Run the ENCOM PULSE Link application on your computer.
2. The Status Bar
connect to a radio.
3. Power the 5000 series radio with the provided wall mount power adapter, and then connect
the radio to your computer using a serial or serial-to-USB adapter cable.
4. Click the Connect to serial device button at the left of the status bar.
5. The Connect to device serial port form is displayed.
6. Select the serial communications port to which the radio is connected, and then click the
Connect button.
For ENCOM PULSE Link Version 2.2.6
at the top right-hand corner of the application's window will prompt you to
Page 21
ENCOM PULSE Link
USER MANUAL
© 2012-2015 Encom Wireless Data Solutions Inc.