Encom iPULSE R User Manual page 104

Baud rate
Data bits
Parity
Stop Bits
Interface Settings
Field Name
Buffer mode
Character timeout
For ENCOM PULSE Link Version 2.2.6
The signaling rate to use when communicating with the device attached
to the FSK connector. FSK radios are limited to 1200 baud.
The number of data bits to use when communicating with the device
attached to the FSK connector.
The type of parity to use when communicating with the device attached to
the FSK connector.
The number of stop bits to use when communicating with the device
attached to the FSK connector.
Description
This option controls how the radio handles data received from the device
attached to the FSK connector.
Mode
High throughput
Quick turn-around
The maximum amount of time, in milliseconds, to wait before sending out
the data received from the device attached to the FSK connector.
The radio will accumulate data in its buffers, and will send it out when one
of the following conditions are met:
The number of accumulated characters reaches the maximum
packet size (determined by the radio).
Page 104
ENCOM PULSE Link
Supports full-duplex operation.
Description
The radio automatically selects the best
packet size based on the Character
timeout setting.
Data may be delayed, but the best use is
made of the available wireless bandwidth.
Data is transmitted as soon as it is
received from the device attached to the
FSK connector.
© 2012-2015 Encom Wireless Data Solutions Inc.
USER MANUAL