Encom iPULSE R User Manual page 140

3. When a radio has been reset, its IP address is set to 192.168.0.1. If this address is not
compatible with your computer's network settings, PULSE Link will not be able to
communicate with the radio. In that case, a
Address, and the Status column indicates that the radio is unreachable.
If this occurs, change the radio's IP address to a compatible one using the
Address button.
4. If your computer's network address is compatible with the radio's IP address, the
is shown at the left of the radio's MAC Address, and the Status column indicates that the
radio is available.
For ENCOM PULSE Link Version 2.2.6
indicator is shown at the left of the radio's MAC
Page 140
© 2012-2015 Encom Wireless Data Solutions Inc.
ENCOM PULSE Link
USER MANUAL
Change IP
indicator