Pulse Remote (2) Configuration - Encom iPULSE R User Manual

PULSE Remote (2) Configuration

The following table shows the configuration settings required for the PULSE Remote radio with unit
address 2. The other settings do not affect the wireless network operation, and are not discussed in
this example.
Settings Tab Name
Wireless
Wireless
Wireless
Wireless
Wireless
Wireless
Wireless
For ENCOM PULSE Link Version 2.2.6
Setting Name
Repeater in system
Operating Mode
Primary hop pattern
Repeater hop pattern
Network address
Unit address
Security key
Page 149
ENCOM PULSE Link
Value (for this example)
Yes
Remote
1
(Not used - can be set to any value)
0
2
0
© 2012-2015 Encom Wireless Data Solutions Inc.
USER MANUAL