Chapter 3: Using Encom Pulse Link; Running Encom Pulse Link; Connecting To A Radio - Encom iPULSE R User Manual

Chapter 3: Using ENCOM PULSE Link

Running ENCOM PULSE Link

You can run ENCOM PULSE Link using any of the following methods
Select Programs -> Encom -> PULSE Link -> Encom PULSE Link from the Windows Start
menu
If you requested that a PULSE Link shortcut be installed on your desktop, you can start
PULSE Link by double-clicking the desktop icon:
If you requested that a PULSE Link shortcut be installed in the QuickLaunch panel, you can
start PULSE Link by clicking on the QuickLaunch icon:

Connecting to a Radio

ENCOM PULSE Link supports two families of 900 MHz serial radios:
ENCOM PULSE radios (configured via USB interface)
ENCOM iPULSE radios (configured via Ehthernet interface)
ENCOM 5000 series adapter boards (configured via Serial interface)
To connect to a radio, follow the procedures found in the following topics:
Connecting to a PULSE Radio
Connecting to an iPULSE Radio
Connecting to a 5000 Series Radio
For ENCOM PULSE Link Version 2.2.6
Page 15
© 2012-2015 Encom Wireless Data Solutions Inc.
ENCOM PULSE Link
USER MANUAL