Upgrading A 5000 Series Radio - Encom iPULSE R User Manual

Upgrading a 5000 Series Radio

To upgrade a 5000 series radio in which a 5000 series adapter card has been installed:
1. Make sure that the radio is powered, and then connect it to your computer via a serial or
serial-to-USB cable.
2. Click the Connect to serial device button at the left of the status bar.
3. The Connect to device serial port form is displayed.
4. Select the communications port to which the radio is connected, and then click the Connect
button.
5. Wait until PULSE Link has retrieved the radio's configuration settings.
For ENCOM PULSE Link Version 2.2.6
Page 40
© 2012-2015 Encom Wireless Data Solutions Inc.
ENCOM PULSE Link
USER MANUAL