Resettting An Ipulse Radio - Encom iPULSE R User Manual

Resettting an iPULSE Radio

Under certain circumstances, you may find that you are no longer able to communicate with an
iPULSE radio. If this happens, you may be able to restore communications by resetting the radio.
To reset an ENCOM iPULSE radio:
1. Select the appropriate radio in the
button. You will be prompted for permission to reset the radio:
Click the Yes button to proceed.
2. While the radio is being reset, a
and the Status column indicates that the radio is being reset.
For ENCOM PULSE Link Version 2.2.6
iPULSE Radios form, and then click the Reset Device
indicator is shown at the left of the radio's MAC Address,
Page 139
ENCOM PULSE Link
USER MANUAL
© 2012-2015 Encom Wireless Data Solutions Inc.