Encom iPULSE R User Manual page 136

5. If you have just received your iPULSE radio from ENCOM, its default IP address may not be
compatible with your local network. In this case, a
MAC Address, and the Status column indicates that you must change the radio's IP address.
In order to connect to a radio that is unreachable, you will have to change it's IP address to a
compatible value. Refer to the
information on changing the radio's IP address.
Refer to the following topics for more information on the functions available in the iPULSE Radios
form:
Changing the IP Address of an iPULSE Radio
Resetting an iPULSE Radio
Refreshing the iPULSE Radio List
Viewing or Changing the Settings of an iPULSE Radio
For ENCOM PULSE Link Version 2.2.6
Changing the IP Address of an iPULSE Radio
Page 136
ENCOM PULSE Link
indicator is shown at the left of radio's
© 2012-2015 Encom Wireless Data Solutions Inc.
USER MANUAL
topic for