Poll Test Toolbar - Encom iPULSE R User Manual

Poll Test Toolbar

The Poll Test toolbar allows you to manage a poll test session.
The following table describes the items found in the Poll Test toolbar:
Item Name
Start
Stop
Reset
Packet size
Remote radio addresses
For ENCOM PULSE Link Version 2.2.6
Description
Click the Start button to start a poll test session.
Click the Stop button to stop an active poll test session.
Click the Reset button to reset the statistics during a poll test
session.
Set the size of the packets that will be sent to the radios from the
master. On of the following options can be selected.
Option
Short 3 bytes
Medium 64 bytes
Long 128 bytes
Specify one or more Unit Addresses to identify the radios that are
to participate in the poll test. You can specify the addresses in a
number of ways.
Format
Single address
Multiple addresses separated by
commas
Single range of addresses
Multiple ranges separated by
commas
Page 127
ENCOM PULSE Link
Packet Size
Example
1
1,2,4
1-4
1-4,6-8
© 2012-2015 Encom Wireless Data Solutions Inc.
USER MANUAL