Encom iPULSE R User Manual page 107

Handshaking
Interface Settings
Field Name
Buffer mode
Character timeout
For ENCOM PULSE Link Version 2.2.6
The type of handshaking to use when communicating with the device
connected to the serial port.
Handshaking
None (always high) No handshaking is used. The radio's CTS
Hardware
RTS/CTS input
framing
Description
This option controls how the radio handles data received from the serial
port.
Mode
High throughput
Quick turn-around
The maximum amount of time, in milliseconds, to wait before sending out
the data received from the device connected to the serial port.
The radio will accumulate data in its buffers, and will send it out when one
of the following conditions are met:
The number of accumulated characters reaches the maximum
packet size (determined by the radio).
Page 107
ENCOM PULSE Link
Description
line is always asserted.
Standard RTS/CTS handshaking is used.
The radio transmits data only when the
radio's RTS line is asserted.
Description
The radio automatically selects the best
packet size based on the Character
timeout setting.
Data may be delayed, but the best use is
made of the available wireless bandwidth.
Data is transmitted as soon as it is
received from the device connected to the
serial port.
© 2012-2015 Encom Wireless Data Solutions Inc.
USER MANUAL