Save Button; Reset Button - Encom iPULSE R User Manual

Save Button

The Save function allows you to save changes you have made to the radio's settings.
To save the changes:
1. Click on the Save button at the bottom of the Settings panel.
2. The Status Panel
3. After the settings has been saved, the application will go back to the idle state.

Reset Button

The Reset function allows you to reset any changes you have made in the Settings panel.
To reset the changes:
1. Click on the Reset button at the bottom of the Settings panel.
2. The content of the Settings panel will be reset to reflect the radio's current configuration.
For ENCOM PULSE Link Version 2.2.6
will indicate that the settings are being saved to the radio.
Page 120
ENCOM PULSE Link
USER MANUAL
© 2012-2015 Encom Wireless Data Solutions Inc.