System Programming; Expansion Unit Type - Panasonic KX-TD816 Programming Manual

4.1 System Programming

4.1 System Programming

[109] Expansion Unit Type

Description
Assigns the type of expansion units to be used in the system.
This allows the system to identify the unit in each expansion unit location.
Selection
KX-TD816
• Areas 1; 2 = C (4 CO) / S2 (2 S0) / S6 (6 S0) / BD (4 DID-Pulse/DTMF) / MD (4 DID-
MFC) / EM (4 E&M) / E (EXT) / A (16 SLT)
KX-TD1232
• Master / Slave
• Areas 1; 2; 3 = C (4 CO) / S2 (2 S0) / S6 (6 S0) / PR (1 PRI) / BD (4 DID-Pulse/DTMF)
/ MD (4 DID-MFC) / EM (4 E&M) / EL (1 E1) / E1 (8 EXT1) / E2 (8 EXT2) / A1
(16 SLT1) / A2 (16 SLT2)
(Master system only: PR, EL)
Default
KX-TD816: C;E
KX-TD1232: Master and Slave – C;E1;E2
Programming
KX-TD816
1.
Enter 109.
Display: 109 EXPAND C,E1
2.
Press NEXT.
Display example: Master:C ;E
3.
Keep pressing SELECT until the desired selection in Area 1 is displayed.
4.
Press
5.
Keep pressing SELECT until the desired selection in the Area 2 is displayed.
6.
Press STORE.
7.
Press END.
KX-TD1232
1.
Enter 109.
342
to programme Area 2, if required.
E1 Programming