Panasonic KX-TD816 Programming Manual page 225

2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:
4.
Enter a group number.
To change the current entry, press CLEAR and the new number.
Display example: CO01:1
5.
Press STORE.
6.
To programme another location, press NEXT or PREV.
7.
Repeat steps 4 through 6.
8.
To programme another outside line, press SELECT and the desired outside line number.
9.
Repeat steps 4 through 8.
10.
Press END.
Conditions
• If a destination for this programming is not assigned, the assignment for DIL 1:1 (Day) /
DIL 1:N performs in day mode as usual.
Features Guide References
Day / Night Service
Direct In Lines (DIL)
General Programming
2.5 Outside Line Programming
225