Clip / Colp Number Assignment For Isdn Extension - Panasonic KX-TD816 Programming Manual

[618] CLIP / COLP Number Assignment for ISDN Extension

Description
Selects the type of additional number for the CLIP and COLP information when making and
answering a call through an ISDN line. You can select the type from one of the following:
DDI: Subscriber number + DDI number
None: Subscriber number + Optional number
Selection
• Port number:
KX-TD816 – 01 through 06
KX-TD1232 – 01 through 12
• Types: DDI / Any number, 6 digits (max.)
Default
All ports – DDI
Programming
1.
Enter 618.
Display: 618 ISDN C/COLP
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:DDI
4.
Press SELECT until the desired selection is displayed and enter the number, if required.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To use this programme, "DDI conversion number" must be selected in programme
[990] System Additional Information, Area 06 - bit 13.
ISDN Programming
3.4 Extension Programming
339