2.6 COS Programming
[510] Night Service Access
Description
Enables or disables switching the Day / Night service on a Class of Service (COS) basis.
Selection
• COS number: 1 through 8,
• Enable / Disable
Default
All COS – Disable
Programming
1.
Enter 510.
Display: 510 NITE SERVICE
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
• The operator extension can switch the mode regardless of setting.
Features Guide References
Day / Night Service
238
( =all COS)
key in step 3. In this case, the display shows
General Programming