Panasonic KX-TD816 Programming Manual page 412

5.1 Optional Programming
Area Bit
06 1 Determines whether the account code is
printed out or not (shown in dots) by the
SMDR.
2,3 Reserved
4 Enables or disables sending outside line
access number "9/0" to a TIE line. When
you dial outside line access number "9/
0" and the outside line is busy, the
system can automatically send outside
line access number "9/0" to a TIE line so
that you can access the outside line
through another PBX.
5 Determines whether to printout the last
entered or the first entered account code
in the SMDR.
6 When an incoming call is received in a
Hunting group (Ring, UCD, Circular,
Terminate), this programme determines
whether the extension where the Do Not
Disturb feature is set receives the call or
not.
7 When an incoming call is received in a
Hunting group (Ring, UCD, Circular,
Terminate), this programme determines
whether the extension where the Call
Forwarding feature is set receives the
call or not.
8 Enables or disables Circular and
Termination hunting.
9,10 Reserved
11 Enables or disables the COLP feature.
412
Explanation
Description Selection Default
0 : not printed out
1 : printed out
0 : enable
1 : disable
0 : first entered
code
1 : last entered
code
0 : receive
1 : not receive
0 : receive
1 : not receive
0 : disable
1 : enable
0 : enable
1 : disable
Features Guide
References
1 Account Code
Entry
1 E&M (TIE)
Line Service
1 Account Code
Entry
1 None
1 None
1 Station Hunting
1 COLP
Optional Programming