Disconnect Time - Panasonic KX-TD816 Programming Manual

2.5 Outside Line Programming

[414] Disconnect Time

Description
Determines the amount of time between successive accesses to the same outside line.
Selection
• Outside line group (TRG) number: 1 through 8,
• Time (seconds): 1.5 / 4.0
Default
All outside line groups – 1.5 s
Programming
1.
Enter 414.
Display: 414 DISCONNECT
2.
Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number.
To programme outside line group number 1, you can also press NEXT.
Display example: TRG1:1.5sec
4.
Keep pressing SELECT until the desired time is displayed.
5.
Press STORE.
6.
To programme another outside line group, press NEXT or PREV, or SELECT and the
desired outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• The disconnect time must be longer than the requirements of the central office or the host
PBX.
• To assign all outside line groups to one selection, press the
display shows the contents programmed for outside line group 1.
• Programme [401] Outside Line Group Assignment is used to assign each outside line to
an outside line group.
Features Guide References
Flash
192
( =all outside line groups)
key in step 3. In this case, the
General Programming