System Data Printout - Panasonic KX-TD816 Programming Manual

[802] System Data Printout

Description
Starts or stops printing the system data. All or a specific range of the current system-
programmed data is printed out. The ranges are as follows:
Manager: Manager Programming [0XX]
System: System Programming [1XX]
Timers: Timer Programming [2XX]
TRS / ARS: TRS / ARS Programming [3XX]
Outside line: Outside Line Programming [4XX]
COS: COS Programming [5XX]
Extension: Extension Programming [6XX]
E1: E1 Programming [7XX]
Resource: Resource Programming [8XX]
Option: Option Programming [9XX]
Selection
• Printout range number:
(All) / 0 (Manager) / 1 (System) / 2 (Timer) / 3 (TRS/ARS) / 4 (Outside line) / 5 (COS)
/ 6 (Extension) / 7 (E1) / 8 (Resource) / 9 (Option)
• Start / Stop
Default
Not applicable.
Programming
1.
Enter 802.
Display: 802 SYSTEM DATA
2.
Press NEXT.
Display: Enter Range?
3.
Enter a printout range number or
Display: Print-Out:Start
4.
Press STORE to start printing.
Printing starts.
To stop printing, press SELECT and go to step 4.
When printing is completed, the display shows:
Display: Print-Out:Finish
5.
Press STORE.
Display: Print-Out:Stop
6.
Press END.
General Programming
2.8 Resource Programming
for "All".
265