3.2 System Programming
[140] DDI Number / Phantom Extension Number Conversion
Description
Used to convert a Direct Dialling In (DDI) number to a phantom extension number in order to
send an incoming DDI call to a specific extension.
Selection
• Location number: 000 through 128
• DDI number: 1 through 6 digits / Blank (no number)
Default
All locations – Blank
Programming
1.
Enter 140.
Display: 140 PHANTOM DDI
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:
4.
Enter a DDI number.
To delete the current entry, press CLEAR and enter the new number.
To assign no number, press CLEAR.
5.
Press STORE.
6.
To programme another location, press NEXT or PREV, or SELECT and the desired
location number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Each DDI number can be one through six digits, consisting of 0 through 9.
Features Guide References
Direct Dialling In (DDI)
294
ISDN Programming