Isdn Port Type - Panasonic KX-TD816 Programming Manual

[423] ISDN Port Type

Description
Assigns the type of each port to either outside line or extension line on an ISDN port basis.
Selection
• Port number:
KX-TD816 – 01 through 04,
KX-TD1232 – 01 through 12,
( =all ports)
• CO (outside line) / Extension
Default
All ports – CO
Programming
1.
Enter 423.
Display: 423 ISDN TYPE
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:CO
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD816, port numbers 05 and 06 are fixed as "Extension".
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the
the contents programmed for Port 01.
• After this assignment, you should reset the system to make this assignment effective.
ISDN Programming
3.3 ISDN Line Programming
key in step 3. In this case, the display shows
307