Did / Tie Incoming Assignment - Panasonic KX-TD816 Programming Manual

Digital super hybrid system
Hide thumbs Also See for KX-TD816:
Table of Contents

Advertisement

[431] DID / TIE Incoming Assignment

Description
Assigns a DID / TIE incoming method, immediate or wink, to each DID / TIE format according
to your central office service.
Immediate: Incoming DID and TIE calls can be received right after the receiving signal
arrives.
Wink: Incoming DID and TIE calls can be received after the wink signal is transmitted to the
central office (after the receiving signal arrives).
Selection
• DID / TIE format number: 1 through 8,
• Immediate / Wink
Default
All DID / TIE formats – Wink
Programming
1.
Enter 431.
Display: 431 SIGNAL IN
2.
Press NEXT.
Display: Format NO?
3.
Enter a DID / TIE format number.
To enter DID / TIE format number 1, you can also press NEXT.
Display example: 1:Wink
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another DID / TIE format, press NEXT or PREV, or SELECT and the
desired DID / TIE format number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all DID / TIE formats to one selection, press the
display shows the contents programed for DID / TIE format number 1.
Features Guide References
Direct Inward Dialling (DID)
General Programming
2.5 Outside Line Programming
( =all DID / TIE formats)
key in step 3. In this case, the
199

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-td1232

Table of Contents