Did Forward Timer (For Mfc-R2) - Panasonic KX-TD816 Programming Manual

2.5 Outside Line Programming

[445] DID Forward Timer (for MFC-R2)

Description
Assigns the length of waiting time of the incoming Direct Inward Dialling (DID) call forward
signal from your central office.
Selection
• DID format number: 1 through 8,
• Time (seconds): 1 through 30
Default
All DID formats – 15 s
Programming
1.
Enter 445.
Display: 445 FWD TIMER
2.
Press NEXT.
Display: Format NO?
3.
Enter a DID format number.
To enter DID format number 1, you can also press NEXT.
Display example: 1:15 sec
4.
Enter the time.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another DID format, press NEXT or PREV, or SELECT and the desired
DID format number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• You cannot leave the entry empty.
• To assign all DID formats to one selection, press the
In this case, the display shows the contents programmed for DID format number 1.
Features Guide References
Direct Inward Dialling (DID)
216
( =all DID formats)
key in step 3.
General Programming