[722] E1 Answer Wait Timer
Description
Assigns an automatic disconnect timer to stop making a call on E1 line, if the called party does
not answer.
This programme is available for the KX-TD1232 only.
Selection
• Outside (CO) line number: 25 through 54,
• Time (minutes): 0 / 1 / 2 / 3 / 4 (0=no disconnection)
Default
All outside lines – 1 min
Programming
1.
Enter 722.
Display: 722 ANSWER WAIT
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter an outside line number 25, you can also press NEXT.
Display example: CO Line NO? 25
4.
Press NEXT.
Display example: CO25:1min
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
8.
Repeat steps 4 through 7.
9.
Press END.
Conditions
None
Features Guide References
E1 Line Service
E1 Programming
4.4 E1 Line Programming
( = all outside lines from 25 to 54)
353