Panasonic KX-TD816 Programming Manual page 273

Display example: Baud Rate:9600
6.
Keep pressing SELECT until the desired selection is displayed.
7.
Press STORE.
8.
Press NEXT to programme word length.
Display example: Word Lengt:8bits
9.
Keep pressing SELECT until the desired selection is displayed.
10.
Press STORE.
11.
Press NEXT to programme parity bit.
Display example: Parity:Mark
12.
Keep pressing SELECT until the desired selection is displayed.
13.
Press STORE.
14.
Press NEXT to programme stop bit.
Display example: Stop Bit:1bit
15.
Keep pressing SELECT until the desired selection is displayed.
16.
Press STORE.
17.
Press END.
Conditions
• The following combinations are invalid.
Parity
Mark
Space
Space
• The programme address of the out-of-service system port is unacceptable.
Features Guide References
Station Message Detail Recording (SMDR)
General Programming
Word Length Stop Bit
8
8
8
2.8 Resource Programming
2
1
2
273