Panasonic KX-TD816 Programming Manual page 74

2.2 System Programming
Display example: RBT :1
3.
Enter a DTMF signal number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
4.
Press STORE.
5.
To programme another selection, keep pressing NEXT or PREV until the desired selection
is displayed.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
• A DTMF signal number can have a maximum of three digits, consisting of 0 through 9, ,
# and PAUSE.
• The DTMF signals are sent to the extensions in the extension group that is assigned as
"VM" or "AA" in programme [106] Station Hunting Type.
Features Guide References
Voice Mail Integration for Inband
74 General Programming