Voice Level (Receive) - Panasonic KX-TD816 Programming Manual

2.5 Outside Line Programming

[443] Voice Level (Receive)

Description
Assigns the received voice level on an outside line basis. This programme is valid only when
the voice path type is set to "4 wire".
Selection
• Outside line (CO) number:
KX-TD816 – 05 through 08,
KX-TD1232 – 09 through 12 (Master), 21 through 24 (Slave),
( =all outside lines)
• -6 db / -3 db / 0 db / +3 db
Default
All outside lines – -3 db
Programming
1.
Enter 443.
Display: 443 V.LEVEL (RX)
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 09, you can also press NEXT.
Display example: CO09:-3db
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
Press END.
Conditions
To assign all outside lines to one selection, press the
Features Guide References
TIE Line Service
214
key in step 3.
General Programming