4.4 E1 Line Programming
[745] E1 DR2 Receiver
Description
Sets a dial receiving type to each E1 channel assigned to DR2.
This programme is available for the KX-TD1232 only.
Selection
• E1 channel number: 01 through 30,
• Dial receiving type: Pulse / DTMF / MFC-R2 / Undefined
Default
All E1 channels – Undefined
Programming
1.
Enter 745.
Display: 745 DR2 RCV DIAL
2.
Press NEXT.
Display: CH NO?
3.
Enter a channel number.
To enter a channel number 01, you can also press NEXT.
Display example: CH01:Undefined
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another channel, press NEXT or PREV, or SELECT and the desired
channel number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Adjust to a setting of the connected telephone company.
• If "Undefined" is selected, the assignment in programme [741] E1 Dial Mode is activated.
• To assign all channels to one selection, press the
shows the contents programmed for channel 01.
Features Guide References
E1 Line Service
362
( =All E1 channels)
key in step 3. In this case, the display
E1 Programming