Isdn Configuration - Panasonic KX-TD816 Programming Manual

[425] ISDN Configuration

Description
Assigns the configuration on an ISDN port basis. This programme is available for ISDN
extensions only.
Selection
• Port number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• Point (point to point) / Multipoint (point to multipoint)
Default
KX-TD816: Ports 05 and 06 – Multipoint; Other ports – Point
KX-TD1232: All ports – Point
Programming
1.
Enter 425.
Display: 425 ACCESS MODE
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Point
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• If one equipment is connected to the ISDN port, select "Point". If multiple equipment are
connected, select "Multipoint".
• To assign all ports to one selection, press the
the contents programmed for Port 01.
ISDN Programming
3.3 ISDN Line Programming
key in step 3. In this case, the display shows
311