E1 Did Receive Digit - Panasonic KX-TD816 Programming Manual

[744] E1 DID Receive Digit

Description
Sets a maximum number of the received dial digits for each E1 channel assigned to MFC-R2.
This programme is available for the KX-TD1232 only.
Selection
• E1 channel number: 01 through 30,
• Digit to be received: 1 through 7
Default
All E1 channels – 4
Programming
1.
Enter 744.
Display: 744 DID RCV DIAL
2.
Press NEXT.
Display: CH NO?
3.
Enter a channel number.
To enter a channel number 01, you can also press NEXT.
Display example: CH01:4
4.
Enter a digit.
To assign no time, press CLEAR.
5.
Press STORE.
6.
To programme another channel, press NEXT or PREV, or SELECT and the desired
channel number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Adjust to a setting of the connected telephone company.
• To assign all channels to one selection, press the
shows the contents programmed for channel 01.
Features Guide References
E1 Line Service
E1 Programming
4.4 E1 Line Programming
( =All E1 channels)
key in step 3. In this case, the display
361